Careers

We’re Hiring

Oxeltech is a German technology company committed to delivering cutting-edge embedded/electronic solutions to our clients in Europe and USA. Our team is composed of talented experts who are passionate about technology and dedicated to pushing the boundaries of innovation. 

We’re always looking for talented hardware and firmware developers. If you’re passionate about electronics and embedded systems, we’ll be happy to hear from you. You can drop your CV at careers@oxeltech.de with a short description of what motivates you to apply at Oxeltech, and we’ll get back to you soon.

Senior / Lead Hardware Design Engineer

Job Type:

Full time

Work Experience:

3-8+ years

Job Location:

Islamabad, Pakistan (On site)

Job Description:

As a Senior / Lead Hardware Design Engineer, you will own hardware designs end to end, from requirements and architecture through schematic design, PCB layout, bring-up, and production transition. You will be the technical authority in design reviews, set engineering standards, and mentor junior engineers. A suitable candidate pays great attention to detail, does not believe in leaving mistakes in the design to be fixed later, and can defend every decision from first principles. A deep, demonstrable command of electronics fundamentals is essential.

Duties & Responsibilities:
  • Own hardware designs end to end, from schematic capture and PCB layout through prototyping, bring-up, verification, and design transfer to production
  • Define hardware architecture for new products, including analog, digital, mixed-signal, and power designs
  • Advanced Circuit design and simulation (PSpice, LTSpice, Altium), including worst-case, tolerance, and thermal analysis
  • Multilayer, high-speed, mixed-signal PCB design with signal and power integrity considerations
  • Lead design reviews and act as technical authority on schematics, layouts, and component choices
  • In-depth datasheet and application note analysis; component selection driven by design requirements, cost, and lifecycle
  • Drive DFM, DFT, and DFR; forecast points of failure and introduce preventive measures
  • Own EMI, EMC, and ESD compliance and certification strategy
  • Mentor junior and mid-level engineers and grow the team’s technical capability
  • Coordinate with firmware, mechanical, and manufacturing teams; manage external vendors and fabrication partners
  • Troubleshooting, debugging, and root-cause analysis on prototypes and field returns
  • Communicate directly with international customers on technical matters (fluent English required)
Qualification:
Education:
  • Minimum Bachelor of Electrical/Electronics/Computer Engineering or equivalent. A Master’s degree is a plus.
Experience:
  • 3+ years of hands-on hardware design for a senior role, or 8+ years with demonstrated technical leadership for a lead role
  • Exposure to the full product lifecycle from concept to production is a strong plus
Must-have Skills:
  • A deep grasp of circuit design and analysis (this is a must; you should be able to defend a solid understanding of electronics fundamentals from first principles)
  • Strong experience in multilayer mixed-signal PCB design, analog and digital circuit design, and power electronics
  • Proven ability to lead designs independently and own technical decisions without constant supervision
  • Solid hands-on experience with EMI, EMC, and ESD compliance
  • Enjoys reading datasheets and schematics in detail (very important)
  • Self-discipline, intrinsic motivation, a growth mindset, and a “can-do” attitude
  • Detail-oriented (very important)
Nice to have (but not a must):
  • Experience with RF design
  • Experience preparing products for formal EMC / safety certification
  • Good programming skills and familiarity with firmware/hardware co-design
  • Experience with project planning and managing a small team or vendors
What We Offer:
  • Competitive salary commensurate with experience and seniority.
  • Opportunity to lead and work on the latest projects and products with a talented, passionate team.
  • Flexible working hours if requested.
  • Professional development opportunities and clear career growth.
  • A flat hierarchy with an open-minded, transparent culture of feedback and growth.

 

This role is ideal for an experienced engineer who is passionate about electronics and embedded systems, enjoys owning designs and mentoring others, and thrives in a transparent, collaborative, ownership-heavy environment. If you meet the above criteria and are eager to lead cutting-edge projects, we encourage you to apply. To apply, email your CV to careers@oxeltech.de. In your email, tell us what motivates you to apply for this role. Please mention SHDE-2026 in your email subject. Only shortlisted candidates will be contacted.

If you don’t meet all the requirements, you can still apply if you think you have the passion and attitude to be a good hardware design engineer.

Hardware Design Engineer / Electronic Design Engineer

Job Type:

Full time

Work Experience:

0-3 years

Job Location:

Islamabad, Pakistan (On site)

Job Description:

Hardware Design Engineer / Electronic Design Engineer understands product requirements, selects suitable components, goes through the datasheets and application notes in detail and designs the circuit and creates a PCB layout. A suitable candidate pays great attention to detail and doesn’t believe in leaving mistakes in the design to be fixed later. A solid understanding of electronics fundamentals are a must in the suitable candidates.

Duties & Responsibilities:
  • Circuit design (digital and analog circuit design)
  • Circuit simulation (using PSpice, LTSpice and Altium among other softwares)
  • In-depth study and analysis of datasheets of components used in the design
  • PCB design and verification as well as research and development activities to meet the highest quality standards of hardware development
  • Component selection specific to the design requirements and application needs
  • PCB designing using tools including Altium Designer, EAGLE and KiCAD
  • Coordinate with hardware and firmware development teams
  • Forecasting points of failure and introducing preventive measures in the design
  • Troubleshooting, debugging, and problem solving
  • Plus: Understanding of compliance with EMI, EMC and ESD standards
  • Communication with customers (Fluent spoken English)
Qualification:
Education:
  • Minimum Bachelor of Electrical/Electronics/Computer Engineering or equivalent degree
Experience:
  • 0 – 3 years of experience (additional experience is welcome)
  • Must-have Skills:
  • A solid grasp of circuit design and analysis (this is a must; you should be able to defend a solid understanding of electronics fundamentals)
  • Experience in multilayer mixed-signal PCB designing, analog and digital circuits designing, and power electronics designing (PCB design is a plus, but this alone is not sufficient without a solid grasp of circuit design and analysis)
  • Self-discipline and intrinsic motivation for design and development activities as well as solving new problems that push you outside your comfort zone
  • Growth mindset and “can-do” attitude
  • Detail oriented (very important)
  • Enjoys reading datasheets and schematics in detail. A knack for fully and deeply understanding the job at hand.
Nice to have (but not a must):
  • Experience with high-speed PCB design
  • Experience with RF design
What We Offer:
  • Competitive salary.
  • Opportunity to work on the latest projects/products with a talented and passionate team.
  • Flexible working hours if requested.
  • Professional development opportunities and career growth.

This role is ideal for a candidate who is passionate about embedded systems, enjoys working closely with hardware components, and thrives in a transparent, collaborative and innovative environment. If you meet the above criteria and are eager to contribute to cutting-edge projects, we encourage you to apply. To apply write an email with your CV at careers@oxeltech.de . Please mention HDE-2026 in your email subject. Only shortlisted candidates will be contacted.

Electronic Hardware System Engineer / Hardware QC Engineer

Job Type:

Full time

Work Experience:

2+ years

Job Location:

Islamabad, Pakistan (On site)

Job Description:

Electronic HW System Engineer / Electronic HW QC Engineer ensures the quality and reliability of electronic components, circuits, and systems throughout the production lifecycle. You will develop and execute testing protocols, identify defects, and collaborate with design and manufacturing teams to uphold product standards.

Duties & Responsibilities:
  1. Quality Testing & Inspection:

    • Develop and implement test plans for electronic hardware (PCBs, power supplies, sensors, embedded systems).
    • Perform functional, environmental (temperature, humidity, vibration), and reliability testing.
    • Inspect components and assemblies using tools like oscilloscopes, multimeters, and automated test equipment (ATE).
  2. Product Assembly:
    • Perform assembly of new product in prototyping phase.
  3. Defect Identification & Resolution:
    • Analyze test data to identify root causes of failures (e.g., soldering defects, component tolerance issues).
    • Collaborate with design and production teams to resolve quality issues and implement corrective actions.
    • Conduct failure mode and effects analysis (FMEA) to mitigate risks.
  4. Compliance & Standards:
    • Ensure compliance with industry standards (IPC-A-610, ISO 9001, MIL-STD, RoHS).
  5. Process Improvement:
    • Optimize quality control workflows to reduce defects and improve production efficiency.
    • Train production staff on quality standards and inspection techniques.
  6. Reporting:
    • Generate detailed test reports, non-conformance records (NCRs), and quality metrics.
    • Create product documentation (Assembly description process, Technical Specifications, User Manuals, etc)
    • Present findings to cross-functional teams and management.

Qualifications:

Education:
  • Bachelor’s degree in Electrical Engineering, Electronics Engineering, or related field.
Experience:
  • 2+ years in electronic hardware quality control, testing, or manufacturing.
  • Hands-on experience with lab equipment (oscilloscopes, Power supplies, logic Analyser) and automated test systems.
Technical Skills:
  • Understanding of Analog and Digital design
  • Proficient with digital interface design including interface modules, cable/wire types and connector systems.
  • Ability to read PCB schematics
  • Familiarity with microprocessors, microcontrollers, and communication interfaces (e.g., UART, SPI, I2C, USB, Ethernet).
Soft Skills:
  • Exceptional attention to detail and analytical thinking.
  • Strong communication skills for cross-departmental collaboration.

Embedded Firmware Engineer

Job Type:

Full time

Work Experience:

0-3 years

Job Location:

Islamabad, Pakistan (On site)

Job Description:

As an Embedded Firmware Engineer, you will be responsible for designing, developing, and maintaining embedded software for microcontroller-based systems. The ideal candidate will have a strong understanding of embedded systems and a passion for developing/working on innovative software solutions. The position demands knowledge in C/C++ programming and experience with real-time operating systems (RTOS).

Responsibilities:
  • Software Development:
    • Design and implement systems using C, C++, and other languages (e.g., Python, C#).
    • Write code for both high-level applications and mid-level device drivers.
    • Utilize a variety of processors and hardware peripherals (e.g., PWM, ADC, DAC, CAN, UART, etc.).
  • Hardware Integration:
    • Collaborate with hardware engineers to integrate software and hardware components.
    • Engage in board bring-up, debugging, and validation of new hardware.
  • Testing and Debugging:
    • Create and execute testing plans and protocols.
    • Identify and solve code and integration issues.
Requirements:
  • Bachelor’s or master’s degree in computer science, electrical engineering, or a related field.
  • Proven experience in embedded software/firmware development.
  • Proficiency in C/C++ programming.
  • Experience with real-time operating systems (RTOS) and embedded Linux.
  • Strong understanding of microcontroller and microprocessor architectures.
  • Familiarity with communication protocols (e.g., SPI, I2C, UART, CAN).
  • Basic laboratory equipment proficiency (Oscilloscope, Power Supply, Multimeter, etc.).
  • Knowledge of sensor integration and signal processing.
  • Excellent problem-solving skills and attention to detail.
  • Strong communication and teamwork abilities.
  • Initiative to identify and solve complex system-level issues.
Nice to Have:
  • Familiarity with version control systems (e.g., Git).
  • Experience with hardware debugging tools and techniques.
  • Participation in robotics competitions/projects.
What the Company Offers:
  • Competitive salary.
  • Opportunity to work on the latest projects/products with a talented and passionate team.
  • Flexible working hours if requested.
  • Professional development opportunities and career growth.

This role is ideal for a candidate who is passionate about embedded systems, enjoys working closely with hardware components, and thrives in a transparent, collaborative and innovative environment. If you meet the above criteria and are eager to contribute to cutting-edge projects, we encourage you to apply. To apply write an email with your CV at careers@oxeltech.de . Please mention EFE-2026 in your email subject.

If you don’t meet all the requirement, you can still apply if you think you have the passion and attitude to be a good embedded developer.

Product Engineer / Hardware Engineer / System Engineer

Job Type:

Full time

Work Experience:

0-3 Years (Fresh graduates are encouraged to apply)

Job Location:

Islamabad, Pakistan (On site)

Job Description: 

We are looking for a Product Engineer / Hardware Engineer / System Engineer with a good foundation in hardware systems, strong client-facing experience, and an ability to work closely with cross-functional teams. The ideal candidate will have 2 years of experience in product development, system engineering, electronics, testing, or support roles, and be confident in interacting directly with customers to support product integration, troubleshooting, and deployment. Fresh grads are encouraged to apply. 

This role requires both technical depth and communication skills, as you’ll serve as a bridge between customers, engineering, and sales. Good problem-solving skills are essential. 

Key Responsibilities: 
Hardware Troubleshooting & Diagnostics: 
  • Analyze and resolve hardware/software issues during field trials or deployments. 
  • Use lab equipment such as oscilloscopes, logic analyzers, and power supplies to perform diagnostics and validation. 
  • Ensure the product functions optimally in real-world environments. 
Client Interaction & Sales Collaboration: 
  • Engage directly with clients to understand their technical needs and use cases. 
  • Support the sales team with technical presentations, product demonstrations, and evaluation trials. 
  • Help drive product adoption by clearly explaining technical value propositions. 
  • Communicate product capabilities and limitations to both technical and non-technical stakeholders. 
Product Deployment & Post-Sales Support: 
  • Assist clients with product installation, configuration, and successful integration. 
  • Provide on-site training and create supporting documentation (user manuals, guides, FAQs). 
Cross-Functional Collaboration: 
  • Work with engineering and design teams to relay customer feedback and suggest product improvements. 
  • Participate in internal reviews to help enhance product quality and functionality. 
Travel: 
  • Willing to travel up to 50–70% (within Pakistan and internationally) for client visits, product trials, and technical support. 
Required Qualifications: 
Education:
  • Bachelor’s degree in Electrical/ Electronics Engineering, Computer, Telecom, IT, or a closely related discipline.
Professional Experience: 
  • Preferred 2+ years of industry experience in electronic hardware design, testing, field support, or product integration. Fresh graduates are encouraged to apply. 
  • Track record of customer-facing technical roles, especially involving direct client interaction and collaboration with sales or business development teams. 
  • Plus: Experience supporting the full product lifecycle from initial trials to final deployment.
Technical Proficiency: 
  • Strong hands-on skills with lab equipment such as oscilloscopes, logic analyzers, power supplies, and automated test systems. 
  • Proficient in diagnosing and resolving hardware/software integration issues in real-time field environments. 
  • Familiarity with embedded systems, PCB testing, and system-level troubleshooting.
Communication & Collaboration: 
  • Excellent verbal and written communication skills, with the ability to present complex technical concepts to both engineering and non-technical stakeholders. 
  • Ability to effectively collaborate with sales teams, relay technical value to clients, and contribute to pre-sales activities. 
  • Strong interpersonal skills with a customer-first attitude.
Other Skills:
  • Proactive, solution-oriented mindset with strong analytical and time management abilities. Structured reporting skills.

Internship: Firmware Developer

Job Location:​

Islamabad, Pakistan (On site)​

Type:

Paid

Duration:

8–12 weeks - can convert to a part time or full time job

About the Role:

We’re looking for a Firmware Developer Intern who is eager to work on real-world embedded systems. You’ll help in writing, testing, and debugging firmware for microcontroller-based products.

Responsibilities:
  • Write and debug firmware for embedded systems using C/C++
  • Interface with sensors, communication modules (I2C, SPI, UART, etc.)
  • Participate in firmware development for STM32, ESP32, or similar platforms
  • Collaborate with the hardware team to ensure firmware-hardware integration
  • Maintain code documentation and version control (e.g., Git)
Requirements:
  • Currently pursuing or recently completed a degree in Electronics/Computer Engineering or related
  • Understanding of embedded C/C++ programming
  • Familiarity with at least one microcontroller platform (Arduino, STM32, ESP32, etc.)
  • Bonus: Experience with FreeRTOS, low-power firmware, or IoT protocols.

If you’re interested, write us a short email at careers@oxeltech.de with a title FW-Intern-2026 and tell us how you became interested in this topic and what relevant hobby work you have done. Looking forward to hearing from you!

Internship: Electronics/Hardware Developer

Job Location:​

Islamabad, Pakistan (On site)​

Type:

Paid

Duration:

8–12 weeks - can convert to a part time or full time job

About the Role:

We are offering an internship opportunity for passionate individuals in Electronics/Hardware Development. This role involves hands-on experience in designing, testing, and debugging electronic circuits and prototypes.

Responsibilities:
  • Design and test basic analog and digital circuits
  • Work with PCB design tools (e.g., KiCAD, Altium)
  • Support the prototyping and debugging of embedded hardware
  • Collaborate with firmware and R&D teams for system integration
  • Document schematics, BOMs, and design revisions
Requirements:
    • Enrolled in or recently graduated from an Electronics, Mechatronics, Computer Engineering or related program
    • Solid fundamental understanding of electronics circuit 
    • Basic knowledge of circuit design, electronics components, and PCB layout
    • Familiarity with microcontrollers (e.g., STM32, ESP32, AVR) is a plus
    • Hands-on experience with lab tools (multimeter, soldering station, etc.)

If you’re interested, write us a short email at careers@oxeltech.de with a title HW-Intern-2026 and tell us how you became interested in this topic and what relevant hobby work you have done. Looking forward to hearing from you!

Subscribe Our Newsletter

  • We promise you will not recieve spam from us. You can unsubscribe anytime